 |
Filling the reservoir
- Remove the inner collapsible reservoir from the
outer pack.
- Fill the liquid reservoir to the desired level with
water (and ice if desired).
- Seal tightly and check for leaks.
- If not filled completely, remove any trapper! air
by inverting and squeezing the Bite Valve mouthpiece
to purge.
- Insert the filled reservoir into the pack with the
filling port at the top of the pack.
- Note: the tubing is compatible with most water purifiers.
By removing the Bite Valve, you simply plug the tubing
onto the discharge side and fill through the tubing.
|
| Cleaning and Storing the CamelBak
- Always rinse well with hot water after every use.
- A double teaspoon solution of household bleach in
a full reservoir of water will sanitize the reservoir
.A double teaspoon of baking soda in a full reservoir
of water left overnight helps reduce residual taste
and odor.
|
 |
Ergo Hydrolook
The ergo hydrolock shuts off flow for added security
during transport and the 90 degree bend puts the Big
Bite T Valve into an ergonomic position for drinking.
With a simple flip, the on/off mechanism can be activated
or shut off.
|
 |
Big Bite, Valve Mouthpiece Made from 100%
medical grade silicone, CamelBak's patented one piece
design is simple to use and clean. Just bite and sip.
The mouthpiece is removable for cleaning. Never use
sharp instruments on the valve, if the slit does not
appear, pinch the valve and roll between your fingers
until the slit opens.
|
 |
Screw Cap Closure
The Screw Cap Closure lets you easily fill the reservoir
while providing a positive seal for leak proof performance.
The extra wide opening is large enough for ice cubes,
for hot conditions. A heavy duty vinyl tether secures
the cap. The reservoir holds 50 oz (1.5L) of water and
weighs 3.7 Ibs (1.7kg) when full.
|
| |
| Return to the Accessories page |
Mascot Design
